The newest system of window blinds SPINELLA includes a comfortable spring shaft which automatically rolls the material into the cassette. The blind can be stopped at any desired point by a cleat. Spinella constitutes an innovative solution to a burdensome sun exposure, perfect for new generation windows made of PVC aluminium and wood. Varied patterning of our fabrics enables matching their colour and facture to the design of your interior.
Measurement of a cassette anti-glare roller blind Spinella is very easy. Following a manual will help you properly measure and mount the blind.
Making measurements provide only width and height of the glass with the glazing beads according to the instructional picture below.
In case of round glazing beads 2 cm extra are added to the provided width of the roller blind to fit the guide rails. To mount the guide rails properly at least 1 cm of flat surface is needed on each side of the window frame.
The entire width of the blind is approx. 3 cm larger than the width of the fabric (glass+glazing beads).
Mounting of a cassette blind SPINELLA is very easy. It can be mounted:
MANUAL HOW TO MOUNT A CASSETTE ROLLER BLIND WITH GUIDE RAILS
b. guide rail
c. end cap
d. pulley set
e. glazing bead
f. window sash
step one - surface preparation
Window frame needs to be cleaned in places where a cassette and rails will be fixed
step two - guide rails mount
Remove a protection of an adhesive tape and glue two guide rails on both sides of a window sash 1 centimetre from a glazing bead. Fixing rails should start from a handle side.
In case when the distance from a handle to a glazing bead is shorter than 1 centimetre the guide rail should be fixed maximally close to the handle. Glue another rail proportionally far from a glazing bead as to place the roller blind in the central part of the window
step three - cassette mount
After having fixed guide rails remove protection of a cassette tape and glue it on the upper part of a window sash in such a way to put its edge in the same place as the rail’s edge. There should be a right angle between the rails and the cassette.
SPEED REDUCER FEATURES: