DUO black-out cassette roller blind
Cassette roller blind DUO is an original system of two fabrics in one cassette. Depending on your needs you black out or decorate the room with one of the fabrics.
A new blind DUO is a cassette blind with rails where two fabrics are placed in one cassette. Depending on your needs you black out or decorate the room with one of the fabrics. You can also arrange window decoration with two fabrics at the same time. Sunlight penetration is limited by side rails and a covering cassette.
- fixable to window sashes
- white PVC fixtures
- perfect for new generation windows made of PVC, aluminium and wood
- the blind is based on an aluminium roller and finished with an aluminium bar
- chain drive unit looks subtle even on small window sashes
- a new blind DUO is a cassette blind with rails where two fabrics are placed in one cassette. (2 impregnated or 1 impregnated + 1 gummed)
- size of cassette roller blinds enables sustaining interior aesthetics even when mounted directly on the window sash
- cassette roller blinds are a perfect solution for too intensive sun exposure
- possibility of combining two fabrics which constitutes a unique window decoration
- cassette system enables opening the window without the necessity to roll up the blind
- properly fixed side rails make it possible to roll down the blind with a window half-open while the fabric stays close to the glazing
- practical solution guaranteeing privacy
- reliable protection of interior against sun exposure
- innovative and very elegant system combining practical use and high aesthetics
- fabric colours available on the Internet may slightly differ from the original colours (we don’t take the responsibility of individual monitor settings)
- if you have doubts concerning the colour, contact us- fabric colour claims won’t be accepted
Measurement of a cassette roller blind DUO is very easy. Following the manual enables proper measuring and eventual mounting of the blinds.
Making measurements provide only width and height of the glass with the glazing beads according to the instructional picture below.
In case of round glazing beads 2 cm extra are added to the provided width of the roller blind to fit the guide rails. To mount the guide rails properly at least 1 cm of flat surface is needed on each side of the window frame.
The entire width of the blind is approx. 3 cm larger than the width of the fabric (glass+glazing beads).
Mounting of a cassette roller blind is very easy because it is mounted to a window sash by strong foam tapes. Owing to such a solution the window keeps the warranty because we don’t use screws.
step one - surface preparation
Window frame needs to be cleaned in places where a cassette and rails will be fixed
step two - guide rails mount
Remove a protection of an adhesive tape and glue two guide rails on both sides of a window sash 1 centimetre from a glazing bead. Fixing rails should start from a handle side.
In case when the distance from a handle to a glazing bead is shorter than 1 centimetre the guide rail should be fixed maximally close to the handle. Glue another rail proportionally far from a glazing bead as to place the roller blind in the central part of the window
step three - cassette mount
After having fixed guide rails remove protection of a cassette tape and glue it on the upper part of a window sash in such a way to put its edge in the same place as the rail’s edge. There should be a right angle between the rails and the cassette.
step four - setting the chain blockade
Next step is setting the brake in a roller blind. The fabric needs to be unrolled as to place the bottom bar evenly to rails edges. Additional blocker should be fixed near a cassette.
In the instructional video the guide rails are mounted on the glazing beads.
Such a solution is possible only with the flat glazing beads.
In case when the glazing beads are round the guide rails should be mounted next to them what, in effect, increases the entire width of the blind by at least 2 cm.
In order to dismount a cassette roller blind it is necessary to cut a tape along the cassette with a wallpaper knife until it is entirely cut off. Clean a blind and a window from tape wastes. A new tape needs to be used in case of another mounting.
|Blind length - range||30-150 cm|
|Blind width - range||20-150 cm|
|Colour of fixings||White|
|Fabric type||Gummed black out fabrics|
|Material of fixings||PVC|
|Type of blind||DUO cassette roller blind|
|Type of mounting||Window sash|
|Warranty time||24 months|
- Product is available
- Dispatch from: 7.93 GBP
- Realization 5 - 10 working days
Clients who viewed this also viewed