MINI cassette roller blind
Cassette roller blind MINI with a small cassette is a practical solution to sunlight exposure. Aesthetic rails limit penetration of sunlight on both sides of a blind and keep the fabric in the same distance from the glazing. The blinds are made of plain materials as well as patterned ones blacking out the room up to 70 %. A cassette and rails are made of white PVC while the blind is weighed by a flat, aesthetic, steel bottom bar. The blind constitutes non-invasive system glued to the window frame. Cassette blinds solve problems with too burdensome glare as well as suit new generation windows made of PVC, aluminium and wood.
- fixed to window sashes
- white PVC fixtures
- fitted on the aluminium roller
- chain drive unit looks subtle even on small window sashes
- finished with a bottom weight bar
- subtle look and multi-use of the blind make it one of the most popular blinds for the clients
- size of cassette roller blinds sustain interior aesthetics
- cassette system enables opening the door without the necessity to roll up the blind
- properly fixed side rails make it possible to half-open the window while the fabric stays close to the glazing
- practical solution guaranteeing privacy
- reliable protection of interior against sun exposure
- fabric colours available on the Internet may slightly differ from the original colours (we don’t take the responsibility of individual monitor settings)
- if you have doubts concerning the colour, contact us- fabric colour claims won’t be accepted
Measurement of a cassette roller blind is very easy. Following a manual will help you properly measure and mount the blind.
Making measurements provide only width and height of the glass with the glazing beads according to the instructional picture below.
In case of round glazing beads 2 cm extra are added to the provided width of the roller blind to fit the guide rails. To mount the guide rails properly at least 1 cm of flat surface is needed on each side of the window frame.
The entire width of the blind is approx. 3 cm larger than the width of the fabric (glass+glazing beads).
Mounting of a cassette roller blind is very easy because it is mounted to a window sash by strong foam tapes. Owing to such a solution the window keeps the warranty because we don’t use screws.
MANUAL HOW TO MOUNT A CASSETTE ROLLER BLIND WITH GUIDE RAILS
b. guide rail
c. end cap
d. pulley set
e. glazing bead
f. window sash
step one - surface preparation
Window frame needs to be cleaned in places where a cassette and rails will be fixed
step two - guide rails mount
Remove a protection of an adhesive tape and glue two guide rails on both sides of a window sash 1 centimetre from a glazing bead. Fixing rails should start from a handle side.
In case when the distance from a handle to a glazing bead is shorter than 1 centimetre the guide rail should be fixed maximally close to the handle. Glue another rail proportionally far from a glazing bead as to place the roller blind in the central part of the window
step three - cassette mount
After having fixed guide rails remove protection of a cassette tape and glue it on the upper part of a window sash in such a way to put its edge in the same place as the rail’s edge. There should be a right angle between the rails and the cassette.
step four - setting the chain blockade
Next step is setting the brake in a roller blind. The fabric needs to be unrolled as to place the bottom bar evenly to rails edges. Additional blocker should be fixed near a cassette.
In the instructional video the guide rails are mounted on the glazing beads.
Such a solution is possible only with the flat glazing beads.
In case when the glazing beads are round the guide rails should be mounted next to them what, in effect, increases the entire width of the blind by at least 2 cm.
NOTE: Please measure according to the instructions in the "Measure" tab and not the following film. The film was included as an assembly instruction for blinds and not a measurement.
In order to dismount a cassette roller blind it is necessary to cut a tape along the cassette with a wallpaper knife until it is entirely cut off. Clean a blind and a window from tape wastes. A new tape needs to be used in case of another mounting.
|Blind length - range||30-140 cm|
|Blind width - range||20-160 cm|
|Colour of fixings||White|
|Fabric type||Impregnated fabrics from group I and II|
|Material of fixings||PVC|
|Type of blind||Mini cassette roller blind|
|Type of mounting||Window sash|
|Warranty time||24 months|
- Product is available
- Dispatch from: 7.93 GBP
- Realization 5 - 10 working days