Items: 0

0.00 GBP

Aluminium window sill Softline- Brown RAL 8019

  • New
  • Recommended
0
Rating (0/5)

The aluminium window sills we offer are products of the highest quality. Made of aluminium sheets with additional protection; intended to be fitted with wood, aluminium or PVC windows.

Producer: toma

Print an offer
Add to wish list
If you haven't decided yet to buy this product, add it to your personal wish list which you can manage at any time

The aluminium window sills we offer are products of the highest quality. Made of aluminium sheets with additional protection; intended to be fitted with wood, aluminium or PVC windows. The aluminium window sill is covered with polyethylene (in the form of a protective film) over its entire surface, as well as with polyester paints that increase the material’s durability. High quality aluminium sheet guarantees a long product life. Its main features are resistance to sunlight, temperature, moisture, deformation and as well as stability and extreme durability. Very easy to clean with widely available household cleaners, they are also extremely easy to install.

FEATURES OF ALUMINIUM WINDOW SILLS

  • intended for installation with PVC, wood or aluminium windows.
  • resistance to chemical agents.
  • easy installation.
  • material: aluminium sheeting – surface covered with polyester coatings and additionally secured with a protective film (polyethylene).
  • end-caps to the window sill must be purchased separately - available in the tab 'Accessories'

ADVANTAGES OF ALUMINIUM WINDOW SILLS

  • light and UV resistance.
  • damp, stain and temperature resistant.
  • easy to clean with widely available household cleaners

ADDITIONAL INFORMATION

  • shipping cost provided in the bookmark ‘delivery’ applies to window sills with the maximum length of 1,7m and weight up to 30 kg. In case of longer sills or larger weight the delivery cost will be calculated individually
  • price refers to the smallest available width (depth) of the window sill.

NSTALLATION OF ALUMINIUM WINDOW SILLS

The installation method and location of a window sill can lead to fungus or mould formation as well as so-called 'thermal bridges' (local reduction of thermal insulating power). So, certain principles need to be observed during sill installation.

The sill should protrude approximately 30–40 mm from the wall. It should be attached to the so called 'T-moulding', which is permanently screwed to the lower part of the window frame. Using the T-moulding, it is possible to correctly seal the window reveals.
If the window sill is installed with a PVC or aluminium window, the window sill flange should be placed under the window reveal T-moulding.
When installing a wooden window, check if the sash frame member (stile/rail) features a factory-made notch used to mount the window sill. If there is no such notch, a 'wall chase' should be made.

Due to the fact that aluminium window sills expand linearly (1.2 mm per 1 running metre) an 'expansion joint' (the space between two adjacent surfaces that allows for their independent static work and deformation) should be left between adjacent surfaces. This should be 5 mm on both sides of the window sill.
When installing a sill remember to maintain a 5–10 percent drop so water can drain freely away.
Window sills are installed with aluminium or PVC side caps. At the front of a building,
the caps have a closed slot to drain water away, in order to avoid plaster cracking.
Polyurethane glues should be used during installation.
    
Remove the protective film immediately after installation.

All necessary accessories required for proper installation of window sills (including side caps) can be found in our shop under 'Accessories'.

CROSS SECTION OF ALUMINIUM WINDOW SILL

 

Shipping rates may differ when additional duties or other non-routine customs charges apply in the country of delivery.

Technical data

Colour Brown RAL 8019
Length up to 600 cm
Material Aluminium
Measure unit Lm
Thickness 1 mm
Type External window sill
Width - range 10-40 cm

Accessories

Dedicated sill connector Yes, extra charge
End caps Yes, extra charge
Mounting foam Yes, extra charge

Warranty

Warranty time 12 months
A type bird spikes

A type bird spikes

127.44 GBP

A16 bird spikes

A16 bird spikes

1.45 GBP

B type bird spikes

B type bird spikes

151.69 GBP

C type bird spikes

C type bird spikes

123.49 GBP

D type bird spikes

D type bird spikes

121.69 GBP

Low expansion caulking foam

Low expansion caulking foam

4.40 GBP

Mamut mounting glue

Mamut mounting glue

7.86 GBP

7.00 GBP/lm
  • Product is available
  • Dispatch from: 11.10 GBP
  • Realization 5 - 14 working days
Katarzyna Augustyniak

Katarzyna Augustyniak

category specialist
Enquire

Why us?
Our strong points

  • professional staff
  • quality guarantee
  • safe shopping
  • prompt shipment
 

Quality guarantee

We have a professional attitude to our customers, what is guaranteed by the certificates we own.

Clients who viewed this also viewed

Recently viewed

We accept payments: